How to Connect HITOSINO Camera to Hikvision/HITOSINO Non-POE NVR

Struggling to connect your camera to a HITOSINO or Hikvision Non-PoE NVR? In this guide, we’ll walk you through the exact steps to seamlessly connect your cameras using a PoE switch and set up remote access with the Hik-Connect app.

Preparation

Before starting, make sure you have:

• Camera Factory Reset: The camera is reset to its factory default settings.
• Ready-to-Go NVR: The Hikvision Non-PoE NVR is activated and connected to a monitor.
• Apps Installed: The Hik-Connect and Guarding Vision apps are installed on your smartphone, and you've logged into your account for remote access.
• Surveillance-Grade HDD Installed: A surveillance-grade hard drive is installed in the NVR to ensure smooth video playback and recording.

Now that your preparations are complete, let's briefly review the key components involved in setting up your surveillance system. Understanding their roles will make the setup easier.

Connection Diagram

Figure 1-1

Brief Introduction of Components Table

Image	Device Name	Function
	Hikvision Non-PoE NVR	Records video from the camera and allows live viewing and playback on a monitor
	PoE Switch	Powers the camera via the network cable and connects it to the router for data transfer
	Router	Connects the camera to your network for remote viewing via the Hik-Connect or Guarding Vision app
	Monitor	Displays live feeds and recorded footage from the NVR for easy monitoring
/	HDMI or VGA Cable	Connects the NVR to the monitor, allowing live video viewing
	Smartphone	View and control the camera remotely with the Hik-Connect or Guarding vision app
	Network Cable	Link the camera, PoE switch, router, and NVR for seamlessdata transfer

Next, let’s move on to the actual setup.

1. Add your camera to Hikvision/HITOSINO Non-PoE NVR

Go to Configuration>Camera>Online Device List., then double-click the camera to add it.

Figure 2-1

A green check mark will appear next to the camera in the Added Device List, confirming it has been successfully added.

Figure 2-2

View the camera’s live feed:
Go to Live View to check the live feed under Live View to ensure the camera is functioning.

Figure 2-3

2. View Your Camera on NVR via Hik-Connect/ Guarding Vision

You can use either the Hik-Connect or Guarding Vision app to view Hikvision or Hikvision-made devices on your smartphone. Guarding Vision is designed for Hikvision OEM devices, while Hik-Connect is for Hikvision-branded ones. Although both apps function similarly, Hik-Connect is recommended as it receives more frequent updates and may offer more features. In this article, we use Hik-Connect as an example.

To ensure Hik-Connect works seamlessly, it's important to confirm that the NVR has a valid IP address. Enabling DHCP is the simplest and most effective method to achieve this, though you can manually set a static IP if preferred. In this guide, we will use DHCP as an example.

1. Enable Hik-connect/ Guarding Vision

Step 1. Enable Automatic Network Settings:

Navigate to the Configuration>Network>General, make sure both DHCP and Auto Obtain DNS are enabled. This allows your NVR to automatically receive a valid IP address from the router.

Figure 3-1

Step 2. Enable Hik-Connect:

Go to Platform Access, and activate the Hik-Connect service. When you activate the Hik-Connect service, you will be asked to agree to the terms of service and policy statement. Finally, click OK in the pop-up windows.

Figure 3-2

Here’s a simple explanation of Stream Encryption: it's a feature that protects your video streams by requiring a password for access. If you leave it enabled, you'll need to enter a password to view the live stream or playback of your camera's video. If you prefer faster and easier access to your camera streams, you can disable it. In this article, we have Stream Encryption disabled to demonstrate the setup process more easily.

Figure 3-3

Step 3. Save the settings:

Finally, click Apply to save the configuration.

Figure 3-4

Up to this point, the NVR configuration is complete. Make sure the Connection Status is Online.

Figure 3-5

3. Add your Hikvision/HITOSINO NVR to your smartphone via Hik-Connect

Next, add your Hikvision/HITOSINO NVR to your smartphone using the Hik-Connect application, this will ensure you to monitor your cameras remotely from everywhere. We assume your NVR has not yet been added to Hik-Connect.

1. Add your NVR to Hik-Connect

Step 1. Add your Device

Open the Hik-Connect App, click Add Device, and select Scan QR Code options to add your Hikvision NVR.

Figure 4-1

Step 2. Scan the QR code:

Point your camera to the QR Code found in the Platform Access menu. The QR Code refers to Figure 3-4. Once the scan is successful, click Add. Once the scan is successful, click Add.

Figure 4-2

The message Adding Completed with a green check mark indicates that you have successfully added your Hikvision device to the Hik-Connect application. Click Finish to complete the steps.

Figure 4-3

Once your NVR is added, click Camera 01 in the Hik-Connect to check if the camera feed is displaying correctly. If not, make sure your camera is properly connected Hikvision/HITOSINO NVR .

Figure 4-4

Conclusion

In summary, setting up your HITOSINO camera with a Hikvision Non-PoE NVR is straightforward with the right guidance. For more tutorials on camera setup or troubleshooting, visit our FAQ and support center for more resources and contact us at support@hitosino.com.

Additional resources
Video tutorial
Operational articles
How to Use a HITOSINO Camera Standalone with a Power Adapter
How to Use a HITOSINO Camera Standalone with a PoE Switch
How to Connect HITOSINO Camera to Hikvision-HITOSINO PoE NVR